Mining Supply Company

Mining Supply Company

Mining Supply Company

Mining Supply Company

Screen Panels

Your Partner in Mining Strength and Precision

Screen Panels • Built for Performance

Why settle for average panels when Songatech delivers proven wear life and throughput?

Songatech is trusted by leading mines across gold, platinum, coal, and iron ore because our panels **run longer, cut sharper, and change out faster**. Every panel is engineered to lower your cost per tonne and raise plant efficiency.

Key facts that set Songatech apart

  • Materials: Polyurethane (PU), rubber, woven wire, wedge wire, hybrid PU-ceramic
  • Formats: Modular 305 × 305 mm, 610 × 305 mm, bolt-down, side/end tension, trommel panels
  • Apertures: 0.3 mm to 120 mm – square, slotted, or tapered (VR)
  • PU hardness: 85–95 Shore A, oil and water resistant
  • Open area: Up to 45% for more tonnes per hour
  • Operating temp (PU): −20 °C to 70 °C
  • Fixing: Pin & sleeve, clip-in, bolt-down, side/end tension
  • Lead time: Stock dispatch within 24–48 hrs

Why clients stick with Songatech

  • Guaranteed wear life – panels last longer, reducing shutdowns and replacements.
  • Cut size stays true – you get predictable separation and steady plant efficiency.
  • Fastest response in the market – stock panels out within 48 hours, custom panels on-time.
  • Lower noise, safer decks – shock absorption reduces risk and improves operator comfort.
  • Full QA traceability – every batch tested and mapped for accountability.

Songatech doesn’t just supply panels — we partner with your plant team to deliver reliability that competitors cannot match.

Polyurethane Modular PanelsAnti-pegging

Abrasion resistant, pegging-proof, with apertures from 0.5–80 mm. Pin & sleeve, clip-in, or bolt-down.

Rubber Panels & Impact PlatesShock absorption

Perfect for feed zones and scalping. Noise reduction plus wear resistance. Apertures up to 120 mm or solid plates.

High-Tensile Woven WireSharp cut

Side/end tensioned for maximum open area and accuracy. Apertures 0.3–63 mm.

Wedge Wire & Dewatering PanelsFine duty

Slots 0.25–2 mm. Excellent for drain-and-rinse or dewatering circuits with minimal blinding.

Trommel Panels & LinersCustom fit

PU, rubber or hybrid builds with lifter profiles to match mill speed and load. Apertures 10–80 mm.

Quality assurance that protects your deck

  • Incoming material checks and durometer tests by batch
  • Aperture and open-area verification against drawings
  • Panel flatness and fixing fit checks
  • Trial kits and wear tracking support on request

Questions clients ask before switching to Songatech

PeggingHow do I stop pegging and blinding?
Switch to VR tapered apertures, adjust slot direction, or try wedge wire for sticky fines. Songatech panels are built with anti-pegging geometry.
CompatibilityCan you match my existing deck and fixing?
Yes. Send deck drawings or photos. We match pin & sleeve, clip-in, bolt-down, or tensioned systems.
SizingWhat aperture should I choose?
Start from your cut size and near-size fraction. Our team helps fine-tune during plant trials so you get it right the first time.

Selection guide (what works best where)

Primary scalpingHigh impact

Use rubber impact panels or heavy PU. Apertures 25–120 mm. Shock absorption keeps feed boxes alive.

Secondary sizingMixed duty

PU modular panels (8–63 mm). Tapered apertures resist pegging, cut stays sharp.

Final sizingHigh accuracy

Woven wire (0.8–31.5 mm). Maximum open area, sharp cut on clean decks.

DewateringFine duty

Wedge wire (0.25–2 mm). High water removal, low blinding.

Trommel screeningCustom

Trommel panels in PU or rubber. Apertures 10–80 mm with lifter profiles to match duty.

Ready to outlast and outperform?

With Songatech panels your decks last longer, run quieter, and cut sharper. Stop wasting money on replacements that fail early.

sales@songatech.co.za

Songatech (Pty) Ltd 

Headquartered in Alrode, Alberton South, and active across all major mining provinces — including the Northern Cape, Limpopo, North West, Mpumalanga, and Gauteng — Songatech has also extended its support into Botswana, Zambia, Lesotho, and the DRC, building a regional footprint that reflects both scalability and reliability.

Songatech (Pty) Ltd. Designed by Mansa Digital Agency  | EmailsPros